Description
The 5 Position 6-Hole Channel HD 1/2″ Thick, part #31-CTA-CB126, gives your trailer a rugged weld-on mount for an adjustable coupler system. It is designed for heavy bumper-pull trailers that need tongue height adjustment. As a result, it works well on equipment trailers, dump trailers, car haulers, and heavy utility trailers that tow behind multiple trucks.
This channel features a standard 3″ inside width. Therefore, it accepts most channel-mount adjustable couplers and towing attachments. You can run a ball coupler head for conventional towing. Alternatively, you can install a lunette ring for pintle hitches or a clevis-style connection when required.
With five mounting positions, the bracket provides roughly 8″ of vertical adjustment. Overall height measures about 12″. It uses six 5/8″ diameter bolt or pin holes, spaced 2″ center to center. Because of this layout, dialing in a level tow is quick and precise.
Unlike lighter channels, this HD version uses 1/2″ plate material. In turn, the added thickness reduces flex under load and supports higher-capacity adjustable coupler builds.
Capacity depends on the complete towing system. When paired with properly rated hardware and a heavy-duty coupler head, this channel supports 20K-class towing setups. However, always confirm the ratings of the coupler, fasteners, welds, and trailer GVWR before towing, since similar channels may carry lower published ratings.
For installation, square the channel to the tongue and run full welds on both sides. Allow it to cool fully. Then bolt the adjustable coupler into the optimal position and torque all hardware to specification. Finally, recheck everything after the first loaded trip.
