Description
The 5/8″ Forged D-Ring with Weld-On Mounting Bracket, part #31-DR-58W, gives you a strong cargo anchor point for trailers and flatbeds. The forged steel ring mounts directly to steel surfaces. This tie-down anchor works on utility trailers, equipment trailers, car haulers, livestock trailers, and commercial flatbeds. It creates a permanent anchor point you can rely on.
This weld-on D-ring uses a 5/8 inch diameter forged ring that resists bending and deformation under heavy load. It pairs with strong straps, chains, and tie-downs to secure cargo each time you haul. The included mounting bracket welds easily to your trailer frame so you get a solid mechanical connection that holds tight on long trips and rough roads.
The ring’s inner dimensions sit around 3″ x 3″, giving you enough room to clip large hooks and heavy chain links without crowding. It stays close to the trailer surface when not in use. The weld-on bracket has enough steel thickness to stand up to repeated loads without flexing.
This D-ring has a working load limit of about 6,130 lbs and an ultimate break strength of around 18,390 lbs when installed correctly. That rating gives you a robust anchor for serious cargo control. Do not use this hardware for overhead lifting.
Install this part by welding the bracket square to a clean trailer surface. Then let the weld cool. This creates a permanent tie-down point for straps, chains, and binders. Check hardware before every load. Use lock washers and quality bolts if you ever bolt this ring through plate mounts for extra strength.
Reviews
There are no reviews yet.