1″ Forged D-Ring w/ Weld-on Mounting Bracket

Description

The 1″ Forged D-Ring with Weld-On Mounting Bracket, part #31-B48, gives you a strong tie-down anchor for hard-working trailers. It adds a strong attachment point for chains, ratchet straps, and load binders. It helps you lock cargo down fast and keep it from shifting on the road.

This forged D-ring uses a 1.00″ ring diameter. It measures about 5″ tall and 5″ wide overall. The weld-on bracket measures about 2-1/8″ wide and 3/8″ thick. That heavy bracket gives you a solid weld area on trailer frames and deck steel.

You get real capacity for cargo control. This D-ring carries a 15,586 lb working load limit and about a 46,760 lb ultimate breaking strength when you install it correctly. It works great on equipment trailers, flatbeds, dump trailers, skid steer haulers, and utility trailers that see daily use.

The forged ring pivots, so you can pull from different angles. It lays flatter when you do not use it. That keeps the deck cleaner and reduces snag points. Weld it to the trailer frame, side rail, or crossmember where you need a reliable anchor point.

This part focuses on cargo securement. It does not support overhead lifting. Use it for tie-downs only. Match your strap ratings, chain grades, and binder ratings to your load and your trailer.

Install it on clean steel. Square it up. Run full welds on the bracket edges. Let the weld cool. Then put it to work on the next haul.